Enhanced anammox-mediated nitrogen removal in bioelectrochemical systems at prolonged negative electrode potentials

Bioelectrochemical anaerobic ammonium oxidation (anammox) systems allow eco-friendly removal of nitrogen from reject wastewater coming from biogas processing as the anammox bacteria have previously shown to have c-type cytochromes acting in the extracellular electron transport (EET) mechanism between the bacteria and electrode. The anammoxosome compartment present in anammox bacteria features a highly curved membrane and contains tubular structures along with electron-dense particles that contain iron, which could enhance the process of EET and enhance nitrogen removal by properly applied potentials. In this study, nitrogen removal was investigated in the electrostimulated anammox nitrogen removal (EANR) cells operated comparatively at open circuit and at applied potentials of???300 mV,???500 mV, and???700 mV vs. Ag/AgCl. At peak performance (at???700 mV vs. Ag/AgCl), the EANR showed up to 140% higher specific nitrogen removal rate (11.2?±?0.3 g N/m2/day) compared to the control reactors without applied potential (8.3?±?0.2 g N/m2/day). The microbial community on the cathode with the applied potential had a higher relative proportion of unclassified Candidatus Brocadia (7.5%) compared to inoculum (>?0.01%), in contrast to cathode without potential (0.74%) and control (0.2%). The EANR system demonstrated to achieve ammonium and nitrite removal efficiencies of 91% and 53%, respectively, during a 24-h test cycle from an initial TN concentration of?~?100 mg N/L. After 150 h, it achieved complete removal of all nitrogen compounds, reaching a 100% removal efficiency. The EANR would be very useful in the establishment of field-scale bilateral anammox-bioelectrochemical technology combining microbial fuel cell bioanodes and EANR biocathodes for wastewater treatment.

» Publication Date: 31/10/2024

» More Information

« Go to Technological Watch





This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement Nº 768737


                   




AIMPLAS, Plastics Technology Centre

+34 96 136 60 40