Optimization of Bulk Heterojunction Organic Photovoltaics

The performance of poly(3-hexylthiophene) (P3HT): phenyl-C61-butyric acid methyl ester (PCBM) organic photovoltaic (OPV) devices was found to be strongly influenced by environmental during preparation, thermal annealing conditions, and the material blend composition. We optimized laboratory fabricated devices for these variables. Humidity during the fabrication process can cause electrode oxidation and photo-oxidation in the active layer of the OPV. Thermal annealing of the device structure modifies the morphology of the active layer, resulting in changes in material domain sizes and percolation pathways which can enhance the performance of devices. Thermal annealing of the blended organic materials in the active layer also leads to the growth of crystalline for P3HT domains due to a more arrangement packing of chains in the polymer. Poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) acts as a hole transport layer in these P3HT:PCBM devices. Two commercially materials of PEDOT:PSS were utilizing in the optimization of the OPV in this research; high conductivity PEDOT:PSS-PH1000 and PEDOT:PSS-Al4083, which is specifically designed for OPV interfaces. It was demonstrated that OPVs were prepared with PEDOT:PSS-PH1000 have a less than the average performance of PEDOT:PSS-Al4083. The power conversion efficiency (PCE) decreased clearly with a reducing in masking area devices from 5 mm2 to 3.8 mm2 for OPVs based on PH1000 almost absolutely due to the reduced short circuit current (Jsc). This work provides a roadmap to understanding P3HT:PCBM OPV performance and outlines the preparation issues which need to be resolved for efficient device fabrication

» Author: Alaa Y. Ali

» Reference: doi: 10.3390/coatings13071293

» Publication Date: 24/07/2023

» More Information

« Go to Technological Watch